SEALXTREME PLUS ACTIVE LEAK REPAIR KIT
FEATURES:
- Perform active leak repair up to 10 bar (150 psi) pressure
- No system shutdown required
- Fix active leaks in less than 30 minutes
- Hand applied
- Works on both metal and non-metal pipes
- Enhance chemical resistance
- Repair and extend pipe life
- Environmentally friendly, reduce carbon footprint
KEY TECHNICAL DATA:
- Tensile Strength: 2482 bar
- Lap Shear Strength: 62 bar
- Flexural Strength: 1793 bar
- Application Temperature: 0 °C to 65 °C
- Dielectric Strength: 16,000 volts
- Hardness: 85 Shore D
- Service Temperature: -50 °C to 120 °C
- Design Pressure: 28 bar
PACKAGING INFORMATION:
Each Kit Contains:
- QuikControl Fiberglass Repair Tape
- QuikControl Sealing Tape
- SmartStic Underwater Epoxy Stick
- Protective Gloves
Kit Sizes:
- 2” x 6’ + 25mm x 5m x 0.5mm
- 3” x 9’ + 32mm x 5m x 0.5mm
- 4” x 12’ + 50mm x 5m x 0.5mm
HOW TO APPLY:
- Safety first, wear appropriate protective gear. Gloves are a must.
- Knead the epoxy stick until 80% harden.
- Place the 80% cure epoxy stick beside the leak.
- Wrap the sealing tape on the epoxy stick.
- Gravitate the sealing tape and push the epoxy stick towards the leak.
- Continue wrapping the pipe with sealing tape until the leak stops.
- Dip the fiberglass repair tape in water for 5 seconds.
- Reinforce the repair area with fiberglass repair tape.
- Polish the surface of fiberglass repair tape with water and rub in a parallel direction with the pipe.
